LIGHT DUTY WRECKERS

CENTURY 411 & 412

After leading the industry for more than 40 years, the new Century line of light-duty towing and recovery units has once again raised the bar for quality, design and function.  The new adjustable-width modular bodies are available in carbon, steel,  aluminum, or the sleek and stylish composite.

The low-profile recovery booms are fabricated from four plates of high-tensile steel to save weight without sacrificing strength.  For increased driver convenience, features such as tailboard L-arm storage, easy-access safety chain pockets and easy-to-operate dual control stations—along with Century’s proven wheellift system—are just a few of the many reasons why you should contact your local Century distributor.

CENTURY 411 & 412 photo gallery

FEATURES

Standard

  • Adjustable Width Modular Body, 88” or 94”
  • 60” Cab-to-Axle Steel Body
  • Drivers & Passenger Side Tool Compartments
  • Tailboard D-Rings
  • Tailboard Safety Chain Pockets
  • Wheel Lift Safety Chains – 5/16, Grade 70
  • 3-Way Pivoting L-Arm System
  • 4,000 lb Lightweight L-Arms
  • L-Arm Storage Pockets
  • Dual Boom & Wheel Lift Controls
  • Independent Wheel Lift Tilt
  • Winch Cable Tensioner(s) & Free Spool Handles
  • Mud Flaps
  • Federal Standard 108 Lighting
OPTIONAL

Optional

  • Aluminum Modular Body
  • Composite Modular Body (94” Wide Only)
  • Tunnel Box
  • Emergency Lighting
  • Tow Sling
  • Dress-up Packages
  • Trailer Hitch
  • PTO/Pump Options
  • Light Pylon
  • Aluminum Tubular Light Pylon (25” & 33”)
  • Fold Down Light Bar Brackets
  • Convenience Packages (Rails & Steps)
  • Dollies & Mounting Options
SPECIFICATIONS

Boom

Boom Structural Rating (S.A.E.) Retracted 34° 16,000 lb
Boom Structural Rating (S.A.E.) Extended 34° 4,000 lb
Reach Past Tailboard Minimum Boom Angle 81 1/2”
Maximum Angle 48°
Boom Elevation Cylinder(s) Single
Maximum Hook Height 173 1/2”

Underlift

Distance from the Tailboard Retracted 35”
Distance from the Tailboard Extended 67”
Lift Capacity Full Extension 4,000 lb
Lift Capacity With Forks Not Applicable
Tow Rating 7,500 lb
Underlift Tilt +14° / – 16°

Winch Rating & Cable

Model 411 412
Winch Capacity 8,000 lb (2) 8,000 lb
Winc Type Worm Worm
Cable Specifications 3/8” x 100’ 6 x 19 I.P.S. 3/8” x 100’ 6 x 19 I.P.S.

Important: All ratings are based on structural factors only, not vehicle capacities or capabilities. Specifications shown are approximations and may vary depending on chassis selected. Miller Industries Towing Equipment Inc. reserves the right to change or modify product and/or specifications without notice or obligation. Some equipment shown is optional.

CENTURY 1135 & 1140 VIDEO

CENTURY 1150

With the call for quick clearance on congested roadways and to handle a variety of difficult recovery and lifting jobs, Century is the number one choice worldwide. As the only manufacture of recovery equipment that designs specifically for towers needs and safety, we are proud to offer the 1150, a 50 ton rotator ideal for heavy recovery with a weight saving design for your daily towing. Like the Century 1075, the 1150 features 360° of continuous boom rotation, a 3-stage recovery boom, optional deck and turret mounted winches and field tested and proven SDU-4 underlift. The 1150 technology is also available in the Century 1150R that features a unique patented roller system that allows the boom to travel up to 60”. The low maintenance roller system has the ability to start and stop under heavy loads, even while rotating. The 1150R also features our patented Raptor™ Wireless Proportional Controls* which includes wrecker controls extendible away from the vehicle to enhance operator sightlines during use, and an information screen with load sensing functions.

CENTURY 1150, 1150r, 1150rxp photo gallery

FEATURES

Body—All 1150 Models

  • 180” Aluminum Modular Body

  • Compartments Over the Wheel Wall
  • Double Panel Doors
  • Door Checks
  • Double Action Latches with Keys & Power Door Locks
  • LED Federal #108 Lighting
  • LED Toolbox Lighting
  • Rubber Fenderettes
  • Mud Flaps
  • Chain Rack
  • Fork Holders & Attachment Storage
  • Rubber Body Isolators
  • Rigid Torsional Resistant
  • Mounting Frame (1150R)
  • Tailboard Mounted D-Rings
  • Two Rear Outrigger Spade Attachments with D-Rings
  • Rear Air & Electrical Hook-Ups
  • Power Elevation
  • 360° Continuous Boom Rotation
  • Proportional 2 Stage Power Boom Extension with Counter Balance Valve
  • Hydraulic Reservoir with an Oil Level Sight Gauge, Tank Drain, & Access Panel
  • Nylatron Boom Slide Pads
  • Holding Valves for Boom Elevation & Extension
  • Dual 2-Speed Winches
  • Cable Tensioners
  • Winch Air Free Spool
  • House Lock Window (Driver Side)
  • Boom Angle Indicator
  • Hydraulic 3-Stage Front Outriggers
  • Hydraulic Rear Outriggers with Removable Pads
  • Air Activated House Lock, Secures Boom for Transport in Rear or Forward Position
  • House Lock Indicator
  • Hydraulic Pump
  • 360° Sheave Head
  • Dual Control Stations
  • Hydraulic Pressure Gauges (Driver Side)
  • 2 D-Rings Mounted on 1st, 2nd, and 3rd Stage
  • Safety Chain Rollers
  • Pylon
  • Large Outrigger Pad
  • Quick Connect Air

1150/1150R/1150RXP

1150
  • Dual 50,000 Planetary Winches
  • 360° Continuous Boom Rotation
  • Optional Knee Boom Underlift (4-stage rear legs, 4-state outrigger)
  • Optional Dual H-Beam Outriggers (HHU Underlift)
1150R
  • 60″ of Front to Rear Turret Travel
  • Raptor Remote Package Standard
  • Tailboard Underlift Controls
  • Optional Dual H-Beam Outriggers (HHU Underlift)
1150 RXP
  • (2) 35,000 lb 2-Speed Planetary Winches
  • Air Free Spool
  • Air Tensioner
  • Directional Sheave Head
  • Recovery D-Ring
  • Optional Knee-Boom Underlift (4-Stage Rear Legs)

Auxiliary Winch Options

  • Dual 22,000 lb. Turret Mtd. Winches (1150/1150R)

  • Single 35,000 lb. Drag Winch (1150, 1150 RXP)
  • Single 50,000 lb. Drag Winch (1150, 1150RXP, & 1150R when equipped with 4-stage rear outriggers)
  • Dual 35,000 lb. Drag Winches (1150)

Knee-Boom Option

  • 55,000 lb. Retracted Lifting Capacity

  • 83 1/2″ Retracted Length
  • 173 3/4″ Extended Length
  • Underlift Tilt: +16°/ -23°
  • “Not Available” on 1150R
  • “Not Available” on Dual-H Beam

Underlift

  • SDU-4 Low Rider

  • Power Elevation
  • Power Extension
  • Power Tilt
  • Hydraulic Fold
  • 3-Stage Design
  • 2 Piece Pivot Pin
  • Upper/Lower Thrust Washer
  • Low Profile Heavy-Duty Crossbar
  • 70° Pivoting Crossbar
  • Rotator D-Ring Package
  • Low Profile Fork Holders
  • 9 Pairs of Cast Steel Forks
  • 1 Pair of Spring Lift Adapters
  • Safety Chains in Tailboard
  • Rear 4 Stage Outriggers – 220” stance
  • Front Mounted 3 Stage H-Beam Outriggers – 262” stance (Not Available RXP)
OPTIONAL
  • 212” Two-Stage Under-frame “H-Beam” Front Outriggers
  • 262” Three-Stage Under-frame “H-Beam” Front Outriggers* (1140 Only)
  • 224” RXP Front Outriggers* (204 TriAxle)
  • Additional Lift Forks & Attachments
  • Dual 15K Turret Mounted Winches* (N/A 1140 w/RXP)
  • 25K or 35K Belly Drag Winch (1135 Only)
  • 35K or 50K Belly Drag Winch (1140 Only)
  • LED Boom Lights
  • Work & Hook-Up Lighting
  • Load Sensing System
  • Radio Proportional Illuminated Controls
  • MMO Power Distribution System (2 Touch Screen Displays, 3 MVEC CANs) (STD on 1140)
  • Right Hand Manual Controls
  • 24”, 30”, 36”, or 48” Tunnel Box
  • Chain Rack for 36” or 48” Tunnel Box
  • Tunnel Box Shelf (Except 24”)
  • Tunnel Box Attachment Storage
  • Stainless & Aluminum Dress Up Kits
  • Knee Boom Underlift
  • Coach LowRider (63.5″/165.5″)
  • Air Shift PTO
  • Manual Override for PTO
  • Outrigger Spade Attachments
  • Tailboard Underlift Controls
  • Chain & Strap Packages
  • Tailboard D-Ring Package
  • Rear Camera & Monitor (Dual)

*Only available on the 1140

Raptor™ Package

The patented Raptor Control Package* is optional on the Century 1135 and Century 1140. The operator can easily maneuver through operations at the unit control station, which can be extended away from the vehicle to enhance operator sightlines during use, or on the wireless remote. Joystick controllers operate boom and winch functions and a display screen offers a variety of information including load sensing, free spool and 2-speed operations.

Take your control to the next level with our patented* Raptor Remote Control system. Our Raptor Controls offer improved visibility when working off of the tailboard of your truck.
The operator can easily maneuver through operations at the unit control station, which can be extended away from the vehicle to enhance operator sightlines during use, or on the wireless remote. Joystick controllers operate boom and winch functions and a display screen offers a variety of information including load sensing, free spool and 2-speed operations.
SPECIFICATIONS

Boom

Feature 1135—2 Stage 1140—3 Stage
Maximum Angle 60° 60°
Boom from Stowed Position 190° CW & CCW 190° CW & CCW
Boom Retracted 70,000 lbs. 80,000 lbs.
Boom Extended 25,000 lbs. 20,000 lbs.
Maximum Hook Height 354” 427”
Boom Extension 130” 216”

Winch Rating & Cable

Feature 1135 1140 / 1135 (35K Winch Option)
Rating (First Layer, Each Winch) 25,000 lbs. 35,000 lbs.
Diameter and Length (Each Winch) 5/8” x 200’ 3/4” x 200’
Type 6 x 37 IWRC 6 x 37 IWRC

Underlift

Fully Retracted 54” 55,000 lbs.
Fully Extended 144” 17,000 lbs.
Tilt Arc 20° +/-
Tow Rating 80,000 lbs.

Body Configurations

1135 / 1140 180” CB Tandem
1135 / 1140 180” CB Tri-Axle
1140 RXP 204” Tri-Axle

Chassis Recommendation

Front Axle 20,000 lbs.
Rear Axle 46,000 lbs.
Minimum C.B. 180″
Maximum Frame Height 42”
After Frame from Center of Rear Axle 40”
1135 R.B.M. 3,000,000 in/lbs.
1140 R.B.M. 3,500,000 in/lbs.
RXP R.B.M. 4,000,000 in/lbs.

Important: All ratings are based on structural factors only, not vehicle capacities or capabilities. Specifications shown are approximations and may vary depending on chassis selected. Miller Industries Towing Equipment Inc. reserves the right to change or modify product and/or specifications without notice or obligation. Some equipment shown is optional.

 

CENTURY 1150